Friday, November 1, 2013

Building The Nostromo - One Piece At A Time.

I'M BACK!!! I never stopped creating - just been very busy with new projects. Nice to post a new update!!!

I've been involved with creating a 1:18 scale world of the original "truckers in space" along with interiors of their towing vehicle Nostromo. The figures are hand sculpted pieces, articulated, 1:18 scale - roughly the same size as your retail Star Wars or GI Joe figures. Comes with accessories and such - imagine a modern toy ALIEN line - that's what I'm creating. I never really planned to get into scratch building any of Nostromo's interior rooms, doors or corridors - I began by just simply creating a small dio that my finished figures could eventually be displayed with. I should have known better - I don't "just simply" do anything when it comes to projects like this. Ha! So instead of going over all that has been accomplished the past couple years, I will refer you to my FLICKR Photostream for all the ALIEN goodness to this point....with some ALIENS and ALIEN 3 thrown in :)

www.flickr.com/photos/sith_fire30/sets/72157629799733654/

My latest work is creating the Nostromo's Main Air Lock door as seen in the film. I started with a foam core/matte board model to get the scale right.



Then for the meat of the project, I created the vectors in illustrator and sent them to a friend of mine to have the parts cut out...





Once the pieces were cut and delivered, I added sculptural details using Aves FIXIT epoxy. I added styrene tubes and sculpted details such as the locking mechanisms to the door as well as some sculpt work to the boarder. The deep recess of the door panels were partially filled with super sculpt before molding...





Once the molds were made, I made a casting of the finished piece.





The door contains both sides - interior and exterior. Below is an images of the exterior and the custom frame I am building that will hold the door into place.



I've also began working on the build to the interior compartment of the Main Air Lock. Images of that will be coming soon. I scratch build using sheet styrene, laser cut materials and coming soon - brass etched pieces (my first time). This work is "for the love of the hobby" at the moment but I can see where I may be selling kits sometime in the future so please let me know if you would be interested. Till then, thanks for taking a look! Much more on the way!!!!



Close to completing the styrene frame build for the walls of the inner compartment to the Main Air Lock. The inner compartment will be broken down into 4 parts: both walls, floor and ceiling. Once complete with frames, sculptural detailing will begin. The figures of Kane, Dallas and Lambert are also 1:18 scale and are works in progress.



Close to completing the first of several 1:18 scaled corridors for the Nostromo spacecraft (ALIEN 1979). These corridors will vary in length, complexity...depends on what section or deck they are located within the ship. So many variants on the ship - I found this awesome video online that features the door and corridors on the ship...it's like the author read my mind.

http://vimeo.com/53743444

Here are a couple images of the first completed corridor - lacking smaller details, the base (being worked on now) paint job and decals....so how about CLOSE to completion LOL!





Started a new section that leads to the Narciccus Shuttle - you can see this section as Ripley is escaping from the Nostromo, approaching the shuttle entrance.



Sculpted and replicated the padded seat railings in the Main Airlock Chamber, also scratch built the dust grate floor from sheet styrene. Additional details are being added over the weekend.



Started a new section this past week - received various laser cut pieces I designed to begin assembling the main entrance way to the Nostromo bridge. The image shows just the laser cut pieces (hastily put together for the photo - nothing glued down). I will add details using sheet styrene, sculptural and greeblie work.



and finally I decided to reboot my Nostromo galley work. The panels I originally hand made looked too irregular. I had a problem with proportion. With these laser cut parts, I have a much better starting point when sculpting the details of each wall panel...that's right, the details for the Egyptian motif (as Ron Bobb called it) will be sculpted. Once these walls are completed, the opposite side and overhead will be created.



Getting back into some more sculpt work for the next several weeks - gearing up to create the H.R. Giger Derelict corridor which will be a total sculpt job. Very excited :)



Hope you all enjoyed it as much as I enjoy working on these projects!

If you want to keep up with daily updates and progress of my work, check out my facebook page - Sith_fire30 Creations

A special THANK YOU to the over 2500 fans that have joined my FB page- you all are awesome! Thanks for you continued interest in my work!

Not a fan of my facebook page yet? - You should be! I post many updates to figures not seen here - there's just so much I can post on this blog (which is a ton already), facebook is your best bet on staying up to date with specific characters you find interest in. Visit Sith_fire30 Creations and click "like"!

My FLICKR page is live and will be updated with all the images you see here and more very soon. Visit my Flickr photostream - Please go and check it out - bookmark my FLICKR page and check in often. Updates tonight!

Find Sith_fire30 Creations on twitter @sith_fire30

I'm on Tumblr as Sith_fire30 Works Sith_fire30 Works If you have a Tumblr account - you can follow me here - Sith_fire30 Works

I am on Pinterest!

Questions, suggestions or comments, please feel free to contact me here, my facebook or my e-mail - sith_fire30@yahoo.com. Hope to hear from you! Thank again!

Dayton